self priming gear pump with 3 m mains cable, integral by-pass pressure regulator,

protected on/off switch,

for engine, gearbox and hydraulic oils of low to medium viscosity,

not suitable for high resistance and long oil promotion distances,

offers moderate pressure performance at a high flow rate

for fluids according hazard class A3 with a flash point higher than 55° C

output: approx. 22 l/min. (SAE30 at free delivery)

max. pressure: approx. 8 bar, suction height up to 2,5 m

electric data: 230V, 50Hz, 2.9A, 0.37kW, IP55

threads: 3/4" (outlet) / 1" (inlet)

Operating advice:

The self-priming electrig gear-wheel pumps EP are designed to transfer and dispense oil.

An integrated bypass-valve limits the max. oil pressure. The pumps feature a protected

switch and must be shut off after operation. Do not let the pumps run more than 5 minutes

in by-pass mode against the closed dispense nozzle. If required, the pump can be upgraded

with a pressure relieve device (Art.-Nr. 34 336 97).

EP 100 and EP 300 are suitable for use with engine, gear and hydraulic oils from low to

moderate viscosity. They are not supposed to be used with hose reels and/or set-ups of

long oil promotion distances.